• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. D

    89L-00 Clutch Weights

    Try using this set up. I think you might have to change you secondary spring to green and see if you have 16.5 or 15 mil rollers. also maybe the 1/4" washers on the pins. Hope this help's Tuning tip number #1 ......... install the primary sheaves off of a VK 540 (Viking)..... they are 12.5...
  2. D

    89L-00 Clutch Weights

    have you changed your secondary spring?
  3. D

    Windsheilds

    if the windsheild is at room temp or warmer tin snips will cut it just fine.
  4. D

    Anyone grind a tooth or 2 off their speedo pickup?

    Why doesnt someone use a G.P.S unit while they are riding to see what the real differance is throught the entire speed range? we all know that snowmobile speedometers are out to lunch, but by how much is the question. I would do this but my gps does not work any longer. this would also...
  5. D

    Anyone grind a tooth or 2 off their speedo pickup?

    what is the reason for this???
  6. D

    RX-1 Charging Problem?????????

    I will try to trouble shoot my problem. I think it may be the voltage regulator/rectifier. checked all the fuses. in the manual it states that @ 5000 rpm i should have 14 volts charging, but in my case the higher the rpm the lower the voltage. I checked the wiring. after that I am going into...
  7. D

    RX-1 Charging Problem?????????

    Has anyone had problems with there rx-1 not charging the battery??? went for two rides this year and battery dies every time. brand new battery. :o| :o| :o| :o|
  8. D

    Aftermarket side panel bolts

    I agree those bolts are Bull%$#@. I'm in Winnipeg Manitoba and I went to a place called The Bolt Supply House Ltd - 1750 st james street phone # 1-204-694-2658. I used a nice s/s allen head bolt with a s/s washer behind it. It will be hard to find a bolt with that big built in washer, I...
  9. D

    Odometter question

    if you take you pod off you will see that there is about 8 small screws on the back, just take them out and seperate the front half from the back half. you should see the problem either the front glass is not sealed all the way around or the gasket between the two halfs is pinched or faulty...
  10. D

    Had to tap my Magnesium chain case.

    try using a stud instead of a bolt, it is stronger. instead of loctite use J.B weld.
  11. D

    Installed my reverse kit today..one question

    I to did the reverse install. very easy just hard to find the kit. the little springs function is to help reduce chatter but more importatly it helps the gears mesh when going forward to reverse and vise versa, other wise yamaha would have made one big gear. if you notice the two gears can only...
  12. D

    Post Pics of your RX-1 custom painted or stock

    My 03 rx1 almost done.


Back
Top