Search results

I've been running with my under tunnel for 4 years now and have yet to hit the exhaust with my track-here's a breakdown of the costs: Total cost was somewhere about $450. ($40 exhaust header off-e-bay, $80 H20-jet plate, $36 sheetmetal segment, $140 Two Bros exhaust off e-bay, $20 exhaust...

I found that having the MPI cooler helped with reducing the icing, it still builds up at the very back, but not like it did before, around the exhaust muffler and all they back. I couldn't really notice any improvement in the handling, but it really helped with the heat build up over the...

I did it on my 08 MTX because of heating and ice issues. Did that 2 seasons ago. Removed the rad. at the same time. 3 seasons ago I installed a KMOD Gen I suspension, which really lightened the suspension. It also felt like I had more working travel and made the handling better in the rough...

I do, but after this season the Wahl drivers are pretty shot. Just was not happy with the 16" wide set up and the drivers did not hold as expected. Thought about going back to 3.0 with Avid drivers and a new 15" track.

Has anyone tried the Peak track yet? Tracks USA has it for $680 and it's a 3.0 pitch. I need a replacement- any one have comments........

I did Upbushman's spindle kit last summer and it's still as tight as when I installed them. If you have any slop in the spindle, I'd suggest going to him for the fix, it really worked on my sled. I can't believe that the stock bushings are just a thin split bushing....

I went with UP bushmans spindle kit at the end of last season and so far they've held up really good. Would recomend his kit.

Let's decide on a location, and we can thow a date out there and see what sticks. I'm open to anywhere in the NW.

TY Ride NW Here's what happened 2 weeks ago in the Berry Fields up by Indian Heaven ( sno-tel Surprise Lakes)...

Is anyone interested in making this happen this season?

I have JT Sports Panels-

Tom helped me set my MTX up with a 16" X 162" track. I was having trouble hitting my rev-limiter and after using his special cut secondary- A6, black/silver spring and changing the tip rivets to 13.3 grams- it worked perfect. It took me about 3 ties in the tip rivet weight to hit the sweet spot...

BoardnBill I've never noticed it creeping after putting it on and letting it warm up. A good fit shouldn't have any problems during any part of boodocking, or when taking off a backpack to dig out your buddies. Most of the times I don't realize that it's on me- it's that comfortable. Take care-

I wear a TekVest after falling on ice and hitting the ice hard on my left side and broke a rib also. Did it on my 3rd ride. Since then I don't ever ride without it. Don't wear anything other than moisture wicking under wear and my Klim jacket. Keeps me warm when cinched. Next to a good helmet...

Are you going to keep your radiator or eliminate it? I can remember staring at my install for a couple nights until I got the courage and just jumped into it. Do you have any Cleco temporary fasteners? I would suggest getting a 25 pc kit for this job and lay it out parallel with the tunnel and...

PM Mtnviper. He gave me a lot of his "lessons learned" when I did my switch out from a 153 to a 162. You'll have to switch your drop down brackets- I used the ones from K-Mod and you'll need to reverse a couple bolts. Other than partially grinding down the rivets in the tunnel and accurately...

Let's do this......I'm interested.

I'm thinking that on my track not having all the windows clipped is causing heat to build up with the rubber dragging on the hifax and when the interrupted window hit's the drivers its wearing the dogs/tooths. I have the Wahl drivers and ran my track with about 2 fingers drop in the center. I...

MOD Skis Works fine on trails and in soft snow. Powder they seem to do OK. I bought them because the looked like the Ekstrom skis that I had on an 85 Ski Doo Formula Plus. In soft or wet snow at lower speeds it carves and turns quick. I needed something to help in side hilling and darting. MOD...

MOD Skis I've had them on my 08 MTX for 2 seasons, going to be the third. Replaced the carbide this summer....they are 7" wide with turned down edges. I like that they are light and carve when boondocking through the trees. I'm currently installing them on the Skinz Concept a-arms and we'll see...