08 Vector handlebar riser

[Snakebit]

The handlebar on my Vec could stand to have another 1-2 inches or rise to be more comfortable doing standup.

A. Anyone know of a good on?

B. Will just a 2 inch rise make me get longer cables?

Thanks guys.

 

[radianguy]

No need to change cables with a 2" riser. I don't think I have any pics of my setup, but it is a huge improvement! Oh btw mine is a powermadd powerriser 325

http://www.powermadd.com/products/PowerRiser325.html

 

[Snakebit]

Sweet.

That's all I am looking for. Just enough to get some flex in my arms. As it is now, I am very stiff armed, and slightly hunched standing. Not comfortable.

 

[Groomerdriver]

Contact Randy at GoBigParts.com. He'll get you set up right!

http://www.gobigparts.com/

 

[Snakebit]

Contact Randy at GoBigParts.com. He'll get you set up right!

http://www.gobigparts.com/

NICE!

This looks like the plan. Thanks!

 

[salestim]

I see that two inches does not require lengthening cables. What about 3 inches. I am 6'1, 225# and radiantguy suggested the 3 inches. Has anyone used the 3 inch risers. Thanks

 

[radianguy]

I don't know if you could get away without a cable extension with a 3" riser. You could un-bolt your bars and see how much room you have, maybe if you rotate them forward you might have enough cable to go with the 3".

 

[salestim]

Thanks again radianguy - the sled is in storage and I wanted to order the parts but I think I will get the sled first and unbolt the handle bars.