PARX
Veteran
I refuse to pay yamahas price for rivets, I know you guys are not using them, what size is the best fit for front exchanger & misc components, i believe they are steel, thanx all.
BURMAD69
Expert
I used just the standard 3/16th by 3/8 steel rivots work perfect.
============================
============================
PARX
Veteran
thanx 69, if i dont have them, i will tomorrow
Crewchief47
Lifetime Member
- Joined
- Jan 16, 2006
- Messages
- 2,830
- Location
- McGregor, ON Canada
- Country
- Canada
- Snowmobile
- 2008 Nytro MTX 45th
http://www.tec-n-tec.com/English/RiveTec/RivecAN.htm
Zinc, steel rivet, steel mandrel multi grip rivets from Canada. These are the same as the Yamaha ones. You will probably want an air riveter. I think betheviper on the 2stroke side sells them for you 'mericans!
Zinc, steel rivet, steel mandrel multi grip rivets from Canada. These are the same as the Yamaha ones. You will probably want an air riveter. I think betheviper on the 2stroke side sells them for you 'mericans!
4Fighter
TY 4 Stroke God
Yes, BETHEVIPER sells them, and at a very reasonable price too.
LiLAl
Extreme
I used those rivets when I replaced one side of the tunnel. The dome head is not exactly the same as the rivets on my 03, but close enough that nobody would notice. I bought a long handled manual riveter, as noted, they are tough to pull with a small pop-rivet tool.
rxwhopper
TY 4 Stroke Guru
expensive yes, but they are a great quality rivit. the cheaper ones arent the same i found
Honk
TY 4 Stroke Master
Harbor feight tools sells a air rivet gun cheap, and it will do these large headed rivs. It works really easy. They are about 35 bucks. Worth the money if you do much riviting. One pull of the trigger, done
bent
Newbie
I used a ss rivet it seems to work the best and they dont rust a good rivet gun will go a long way
Similar threads
- Replies
- 13
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.