1.35 Cobra single PLY ? Studding ?s

[yamadoo]

I have the 1.35 cobra, like it allot. I cant seem to find if the Yamaha VIPER 1.35 Cobra is the single ply or not.

Does anyone know?

Was considering studding BUT since I like it if it is one ply will probably leave well enough alone.

 

[Yamadog]

If the STx dx has 2.52 pitch drivers here is the listing for that track.


144 x 15 x 1.352 Cobra, 2.52" pitch, Two ply, Fully clipped

Tracks USA has all the info you should need

http://www.tracksusa.com/Cobra-deta...8&browse=-47152&shopBy=-13144&catalogId=-3693

 

[Dirtbikekid1998]

If the STx dx has 2.52 pitch drivers here is the listing for that track.


144 x 15 x 1.352 Cobra, 2.52" pitch, Two ply, Fully clipped

Tracks USA has all the info you should need

http://www.tracksusa.com/Cobra-deta...8&browse=-47152&shopBy=-13144&catalogId=-3693

all the 141 use 3.0 pitch not a 2.52. and i am 99% sure it is a singleply.

 

[Yamadog]

Here is the listing for it, it is a single ply - still no problem studding it you just need the studs for single ply. Mine is 252 HP wit single ply 1.6" and have not lost a stud in 1200 miles.

Oh and sorry the review I looked up earlier said 144" track!

Scales for excellent traction and grip, while providing ample float in loose snow
Offers improved powder performance from a unique lug shape and pattern
Free-wheeling track from single-ply technology that requires much less horsepower

Note: The measurement of the lug of the track is 1.25" but the measurement to the protruding tip is 1.352".
Therefore, this track is classified as a 1.352" track

 

[yamadoo]

Thanks guys just what I needed!