1.75" Track question

[revster]

Ya smallest track I've had was a 1.5 Intense on my 03 rev then I've had 440 rev chassis with 1.75. I sold my 07 600 MOD trail converted and got this Nytro. The only thing I don't like is this piss cutter track lol.
Will I need to drop a tooth on top for this track? I think it's stock gearing.

You will be fine the nytro has pretty low gearing already.

I agree.

You won't be required to gear down, but 20t would work well with that track. (down 1). I went down to a 19 but I'm running a 136"

 

[fox_kid_263]

Ok, so I got it all together with the 20 top gear it works good just have a bit of bog under heavy load. Only pulling 8300-8400 rpm and it kinda bogs, but on flat ground full out it will pull around 9200 rpm. What should I adjust on my clutches to get a bit more rpm under heavy load?

 

[Sledtime9]

You have an Ulmer clutch kit. Call him and tell him what it is doing. I am sure they will steer you in the correct direction.