Hellraiser
Newbie
- Joined
- Sep 8, 2024
- Messages
- 1
- Age
- 58
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- Phazer mountain lite
I was just wondering if a 144" track for an Apex 1.75 will fit on a 2007 mountain lite. I know i will have to cut it down to size. Just wondering if it would fit all of the wheels? Thanks
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 3,958
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
Do you mean a Phazer MTN? It should fit barring anything inside the tunnel hitting the paddles. I think I've seen guys using 2" paddles on these. I've installed a used 1.5 from a Doo on an extended Phazer GT after trimming .5" on each side to fit the 14" tunnel.
- Joined
- Jun 1, 2004
- Messages
- 7,728
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
there was lots of room on the 09 rtx i made into an xtx with the 9 tooth drivers for the 1.5" track i put on it. with the stock 8 tooth that came on the mtx/xtx sleds, there should be no issue. be aware if using composit track, they tend to be on the snug side for suspension install, so i recomend assembling rear axle on skid in the sled for more room.
