devon069
Newbie
Has anyone extended their Attak to a 144 and put a 1.75" track on? I love the hook up of the ripsaw on hard pack, but dislike the powder performance of it. I live in Saskatchewan and mostly ride off trail.
Bodacious
TY 4 Stroke Junkie
I researched this quite throughly, all the Mnt shops recommended me to stretch to at least a 151"( minimum). I just decieded if I want a more capable sled in the deep.... just bite the bullet and buy something designed for that type of snow.
my RTX (or whats left of it) is stretched to a 144x1.5. Have not had a chance to get it on the snow though. Certainly looks more aggressive.
newfieattak
Extreme
just put on a 2 inch 136 camoplast on attak today ,removed tunnel protectors ,put on doo 9 tooth extroverts no clearance issues yet ran on stand. also geared down to 22 top with 68 chain.
should hook hard and ready for turbo or supercharger in future.
should hook hard and ready for turbo or supercharger in future.
devon069
Newbie
Can I run a 2" without changing drivers? I understand that i will have to remove the tunnel protectors
newfieattak
Extreme
can t see why not but i would spend the extra money and get the doo drivers no ratcheting/
devon069
Newbie
If I do that will I need to change my gearing? My rpm's would be too high at high speeds
newfieattak
Extreme
the bigger track will cause you to lose power,thats why i geared down ,or you could get 8 tooth drivers to gear down for you. you can get these from cycle works in edmonton becsause doo does not make a 252 pitch 8 tooth,
roller
Veteran
Newfieattak you have 9 tooth drivers in your sled, I did'nt think there was room at the front heat Ex. I am going to streach my attak out to 144"x2" but I was planning on putting 8 tooth driver in. Thanks for the info!!
newfieattak
Extreme
yep, got about 1/4 inch at front with doo 9 tooth drivers hope that is enough clearance
