

- Joined
- Jun 1, 2004
- Messages
- 7,832
- Reaction score
- 2,033
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
Doing the pre season on my 16 xtx and I found almost all the small idler wheels were loosing the rubber. No studs in track and slides are still good. Bought the sled as a nos in dec 2019. Weird part is the inners where worse than the 2 outer. Good thing I pulled them to repack the bearings this year. Never happened to my 11 stock wheels witch have been on a sled since I bought it in 13.


1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,239
- Reaction score
- 2,675
- Points
- 1,733
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
How many miles?


- Joined
- Jun 1, 2004
- Messages
- 7,832
- Reaction score
- 2,033
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
in the neighbourhood of 7000 km.


1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,239
- Reaction score
- 2,675
- Points
- 1,733
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
We have almost 6000 miles on ours 16 vector xtx with 1.25 track and the idler still look good. Have been doing the normal bearing maintenance.
Also hyfax don't hardly wear.
Also hyfax don't hardly wear.


- Joined
- Jun 1, 2004
- Messages
- 7,832
- Reaction score
- 2,033
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
found some more fun. broken right side track adjuster and there was a washer missing from the rear axle. good thing i took it apart to pack the rear axle bearings.
Similar threads
- Replies
- 8
- Views
- 2K