2.86 drivers on 08 nytro

[wizzard717]

Is this possible ? I'm installing a skidoo sc5 137 suspension in my 08 and i'm gonna be going to a single ply track therefor i need to change to 2.86 drivers. I assume its just a typical drivers swap...... any input from you guys would be greatly appreciated.

 

[Superman]

Yes, its a simple driver swap. I assume your going with 8 tooth 2.86" drivers. These drivers about 1/8" bigger diameter than the stock 9 tooth 2.52" drivers. (actually its right around .100 thousandths to be more exact) Everything should fit fine.

 

[wizzard717]

thanks

 

[BADSLED]

There are 2 ply track available in 2.86" pitch and 137" length. You would be better off going that route unless you already have a single ply track.

Furthermore, if your goal is to use a 137" skid why not run the 136" track with stock drivers (2.52 pitch). You can make the 137" skid work without going to 2.86" drivers and track.