2003 rx1 bushing kit

[SHAMARKEN]

where's the best place to get a frt end bushing kit for an 03 ???I see lots of kits for newer styles...
thanks

 

[APEX 06]

Ulmer

 

[Ratpack]

He doesn't have a kit for an 03. Yamaha was nice enough to change it after that year. You will have to get the plastic junk from Yamaha.

 

[horsroute]

The only available solution for a complete front end job is nylatron plastic bushings kits (3) from "Pioneer Performance",that sould last longer than original polyethelene plastic bushings.

 

[Srxspec]

We can provide a kit for the 2003 model sleds, but it will be missing the bushings that go into the upper a-arm at the inner position and also the bushings that go into the upper spindle to a-arm mount location.

 

[SHAMARKEN]

We can provide a kit for the 2003 model sleds, but it will be missing the bushings that go into the upper a-arm at the inner position and also the bushings that go into the upper spindle to a-arm mount location.

ok thanks for the info I just installed an 06 vector front end on the RX once I need new bushing I'll give you a shout!!!

 

[rednecksized]

first of all this is the most helpful post i could find on the subjest, so thanks guys! since this post is so old i was wondering if pioneer is still the best full kits for my 03. 113$ shipped to my door doesnt seem to awful either. thanks again.

 

[stephenk]

Just so everyone know you can still run the ulmer kit for an 03. He sells them without the upper bushings. So u just have to run stock bushings in them.

 

[stomper]

Would the kit work if the top a arm was swapped out for an 04 a arm or would the 04 a arm not fit the 03?

 

[stomper]

first of all this is the most helpful post i could find on the subjest, so thanks guys! since this post is so old i was wondering if pioneer is still the best full kits for my 03. 113$ shipped to my door doesnt seem to awful either. thanks again.

X2