2005 RX1 Cluster

[pano]

My cluster on my sled stopped working. The only light coming on is when the high beams are on. Headlights are working and both fuses by the battery are good. I checked the wiring harness from the cluster to the nose of the sled and it looks good.

LCD/Tach are both off.

Does anyone have any suggestions?

thanks

 

[wreckdiver]

Check where it plugs into the cluster for tightness & corrosion.

 

[pano]

The harness is plugged in tight and there is no corrosion at all.

 

[yox185]

Do you have a buddy with one you can try? Viper gauge will also work. If theirs works you know it's your gauge and not wiring.

 

[Honk]

check speedo cable where it go's into the end of bearing,bearing may be gone!

 

[montanastick]

Your battery may be about dead. When you have a dead cell in your battery the speedo gauge will go zero to 100 then drop to zero intermittently.

 

[Fourcam281]

Did you take the beer holder out and check the wires by the bulkhead? They're known to wear through...