2005 vector cranking problem

[Valur smarason]

I have a 2005 rs vector and i just took the engine and changed the headgasket and stator and after i put everything together only thing left was to put oil in it i wanted to check if it did not turn over correctly but when i got the new barrery i tried to start it but it seems that the starter is turning but not cranking, i accidentally put the battery in wrong the first time and connected it +on - and - on + then it cranked over a few times before the 30 amp fuse broke and i put the battery in the correct way and no crank just spinning the starter so i tested to switch the connection again on the battery and then it turnd over a litle before the fuse went again. Can anyone give me pointers on what could be the problem?

 

[maim]

sounds like your starter or solenoid is bad. try jumping the solenoid to crank it over and see what it does.

 

[Valur smarason]

I figured it out a moment ago just a switched connection.. when i posted the question and was working on the RS i had been working 14 hour nigthshifts for 14 nights in a row so i was not thinking straight now it cranks good, got oil pressure. now i just need 2 new ignition coils and new gas and it should run.
But i still don't get any activity on the dashboard when i turn the key on, but hopfully it comes on when it starts

Thanks for the respons

 

[maim]

dash does not fire on those until engine is running.