2007 Attak track tension

[Kevin]

07 attak studded but no rear cooler
What are the specs for the track tension?

 

[Stubbs]

30-35 mm between the track and the slider/hyfax with 22lbs pressure pulling/pushing down on the centre of the track........ish.
I think all of that info is on your belt guard for you.

 

[Kevin]

30-35 mm between the track and the slider/hyfax with 22lbs pressure pulling/pushing down on the centre of the track........ish.
I think all of that info is on your belt guard for you.

Thanks!

 

[HABS 1]

as loose as u can run it witout it jumpin! if ya got anti ratchets can run real loose, frees up a touch of hp and little easier on the sliders, mine on a lift will sag up 1.5 or more,looks to loose but never had any problems, tom hartman recommend i run it like that, seems to work well

 

[CaptCaper]

as loose as u can run it witout it jumpin! if ya got anti ratchets can run real loose, frees up a touch of hp and little easier on the sliders, mine on a lift will sag up 1.5 or more,looks to loose but never had any problems, tom hartman recommend i run it like that, seems to work well

I do the same. Have studded tracks and in 18k miles no issues. When on the lift off the floor it hangs about 1 1/4 in or so.

 

[HABS 1]

measured mine after reading! mine hangs bout 2, 2 1/4 inches!!