cmharcou
Expert
Any suggestions on how to remove? We have removed the allen screws with a T-15. It doesn't want to slide off the shaft. Any suggestions?
Snowmixer
Pro
- Joined
- Oct 29, 2010
- Messages
- 188
- Location
- Snohomish, Washington
- Country
- USA
- Snowmobile
- 2007 Phazer Mountain Lite
2008 Phazer MTX
2012 Arctic Cat M800 153
Look for a set screw on the bearing that holds it on the shaft.
Oops! I think i read your post too quickly and thought you were referring to having taken out the bolts that hold the bearing plates to the side bulkhead. After reading it again, your mention of the T-15 sounds like you already removed the set screws. Does the bearing look like it is rusted to the shaft?
Oops! I think i read your post too quickly and thought you were referring to having taken out the bolts that hold the bearing plates to the side bulkhead. After reading it again, your mention of the T-15 sounds like you already removed the set screws. Does the bearing look like it is rusted to the shaft?
Last edited:
