studdog
TY 4 Stroke Junkie
Might be my best Yamy yet. 137 miles nicest handling out of the box. Very little ski lift. I notice limiter seems tighter than previous sleds. Steering a liittle stiff but new Curve skis I need to get adjusted. Nice easy trottle pull and plenty of power in mid range. Track and Mono II suspension might be best to date too early to tell. Studdog
I hope so I just traded in my Apex GT for it.
A
Anonymous
Studdog How much wear on your slides? I only got 100 miles out of mine. 2010 vector gt Track way too tight.
apltx08
TY 4 Stroke God
markshop1 said:Studdog How much wear on your slides? I only got 100 miles out of mine. 2010 vector gt Track way too tight.
OUCH!!! whats way to tight? you can run your track looser then previous models cuz of EXTRAVERTS on '10 now...what are specs calling for.
markshop
Veteran
It was at dealer specs. I think specs are 22lbs of weight with little more than 1 inch of sag. Now i have about 1 inch of sag with no weight. It seems to be better but not good for the good snow conditions i was in.
island_rage05
Extreme
those are cheap in canada there like 15 grand lol i wont be getting one of those till there 15 years old and a gazzilion miles on them. Hope u love the ride.
peterdb
Lifetime Member
markshop1 said:Studdog How much wear on your slides? I only got 100 miles out of mine. 2010 vector gt Track way too tight.
100 miles ia all you got out of your hyfax!!! come on, that can't be right...
corvette327
Veteran
The track tension specifaction from my 2010 Vector LTX GT manual is 30-35 MM 1.18-1.38 inches at 22 pounds.
This is the same specifaction as my 2006 Venture.
Are any others with 2010 machines and fully clipped tracks seeing hyfax wear problems?
This is the same specifaction as my 2006 Venture.
Are any others with 2010 machines and fully clipped tracks seeing hyfax wear problems?
markshop
Veteran
The part that was worn down at 100 miles was right at the atack angle where a tight track would wear the most.
I took mine out last night and put on 85 miles. It handled great and was a far better ride than the Apex. It was less effort and a smoother ride. It still had a lot of get up and go in the throttle. It sounds just like the apex. I am happy with the trade. I even switched and rode the 2009 RS Vector that I bought the wife and I like riding that sled. Overall if speed is not your main goal on the trail I would recommend the vector class to a person who wants to do a lot of trail riding and not get beat up on the sled.
markshop
Veteran
Studdog and banks please report back on slide wear. Am i the only one with accellerated wear?
studdog
TY 4 Stroke Junkie
No wear on slides. Track is loose. Runs great. Camoplast prestudded track great as well. Studdog
markshop
Veteran
Studdog How loose are you running your track? I loosened mine so there is 1 inch sag with no weight.
Groomerdriver
TY 4 Stroke Master
Loosen the track until it ratchets on hard acceleration, then tighten from there. Yami tracks are WAY TOO TIGHT at the factory spec!!!!
studdog
TY 4 Stroke Junkie
3/4 tp 1 inch of free sag should work. Remember your track should stretch some with more miles.
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.