Pat Johnson
Newbie
Rolled the sled and wrecked the display box, along with the 12 pin wire connector that plugs into the back. Have a new display box but need to fix the connector. Hoping to simply replace the 12 pin connector end , but need to know the correct wire pin locations. If anyone has a wiring diagram, or could somehow send a picture of the wire locations, that may help. Thanks!
#53 is the connector. You really should become a VIP so you can get manual easily. This is from a 15. Wiring should be same.
Pat Johnson
Newbie
Thank you for the diagram image, I appreciate it! Will try to keep it on the skis from now on.
Mines been rolled countless times. Takes out windshields like candy. Gotta ride it like a dirtbike. If you need actual pics I can do that also but this should be good and mine does not have reverse so missing some wires. Good luck!
2stroken
Expert
So do you have a rollover valve?
Yes. Used it at least 5 times last weekend. To old to try pulling a stuck sled. Just roll it and fill the hole. Lifesaver!
2stroken
Expert
Which version are you using?
4stroke solutions I believe its his second version for Phazer. No prime button.
