8 inch carbides for tuners ?

[snobill]

Anyone make them ?

 

[jpothof]

Stud boy makes a 7.5" shaper. Search YAM S2524-75. I put 6" on my viper inside. No snow to test yet. I'm not sure you could fit much more than 8" on the bar.

 

[Coyote]

http://www.qualipieces.com/client/page1.asp?page=372&clef=1194&clef2=26&setLangue=2

 

[TD Max]

I got some 7.5" shapers for mine. Still need something for the outer position.

 

[ApexXTX/Viper]

Royal Dist. lists an eight inch and a 10 inch from Woody's I believe for tuners.

 

[DranttelSS]

One of our aftermarket catalogs lists a 8" Woodys carbide for the tuner skis

 

[Big_Phil]

http://www.qualipieces.com/client/page1.asp?page=372&clef=1194&clef2=26&setLangue=2

DO NOT use these qualipieces carbides. I have the 4 inch and 6 inch square bar on mine, less than 500 kms and all the carbide is chipped and broken from the bar. Its not like they were cheap either, I am going to contact them and see if they will do anything for me. But not hopeful.

 

[viper50]

http://www.bergstromskegs.com/ 8" Triples.

 

[snobill]

Thanks !