PAvector
Lifetime Member
- Joined
- Feb 24, 2007
- Messages
- 216
- Reaction score
- 54
- Points
- 963
- Location
- Pennsylvania
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper
What is the clearence spec between the clutch wall and belt wall. I thought it was around .020"-.040". I can't find it in the sevice manual. My RS is about .07"-.09" Is this normal? How would this large about affect the engagement, shift speed and topend? 
PAvector
PAvector
black john
TY 4 Stroke Guru
side clerance
i set mine to .015-.020 tho as i have found that thats what has worked for me in the past and it works well for my rx 1 as well. mine came with over.080 and it would blow the track out from under me all the time. after ajusting it down not a problem. . try the new belt first before ajusting as they are a little wider and will take up some of this side clerance. i think thats why this new belt was made this way.
i set mine to .015-.020 tho as i have found that thats what has worked for me in the past and it works well for my rx 1 as well. mine came with over.080 and it would blow the track out from under me all the time. after ajusting it down not a problem.
. try the new belt first before ajusting as they are a little wider and will take up some of this side clerance. i think thats why this new belt was made this way.
