orchie19
Newbie
- Joined
- Nov 8, 2014
- Messages
- 9
- Age
- 38
- Country
- Canada
- Snowmobile
- yamaha apex
Anybody have a set up they woild like to share. Picked the rat weights up cheep. I will be putting then on my 2008 apex. Has ltx gearing and clutching now. I have a h/c black primary spring in my stock along with a few others kicking around to try.
orchie19
Newbie
- Joined
- Nov 8, 2014
- Messages
- 9
- Age
- 38
- Country
- Canada
- Snowmobile
- yamaha apex
Bump for any info guys ?
Anybody have a set up they woild like to share. Picked the rat weights up cheep. I will be putting then on my 2008 apex. Has ltx gearing and clutching now. I have a h/c black primary spring in my stock along with a few others kicking around to try.
scott32
TY 4 Stroke Guru
- Joined
- Jan 12, 2009
- Messages
- 758
- Location
- huron county, ontario
- Country
- Canada
- Snowmobile
- 07 Apex RTX se, 09 Nytro XTX
Don't know if your still around to read this but take what you from it... http://www.ty4stroke.com/threads/super-rats-vs-dalton-adjustables.108932/
scott32
TY 4 Stroke Guru
- Joined
- Jan 12, 2009
- Messages
- 758
- Location
- huron county, ontario
- Country
- Canada
- Snowmobile
- 07 Apex RTX se, 09 Nytro XTX
orchie19
Newbie
- Joined
- Nov 8, 2014
- Messages
- 9
- Age
- 38
- Country
- Canada
- Snowmobile
- yamaha apex
Current set up
08 apex mtx
Trail converted front end and cut down track
Stock motor
Initially I tried 1x 2.5 ball in the weights. Hit the rev limiter after 50 ft. No good. Dam near threw me off the back on grass lol.
Second attempt I tried two 3.5 balls couldn't get more than 9000 rpm
Third attempt tried two 2.5 gram balls with rpms at 10500. Going to try this setup on the trail this week. Helix is a stock ltx.
08 apex mtx
Trail converted front end and cut down track
Stock motor
Initially I tried 1x 2.5 ball in the weights. Hit the rev limiter after 50 ft. No good. Dam near threw me off the back on grass lol.
Second attempt I tried two 3.5 balls couldn't get more than 9000 rpm
Third attempt tried two 2.5 gram balls with rpms at 10500. Going to try this setup on the trail this week. Helix is a stock ltx.
Similar threads
- Replies
- 20
- Views
- 6K