Best clutch kit for Attak?

[monsterattak]

I am looking for a bolt in and run clutch kit that i wont have to fiddle with. Is this too much to ask for? I need to know because i cant fiddle with a clutch on the trail...

What kit is bolt on and go with no fiddling... I live out of snow territory and fly up to ride... can only wrench in summer once or twice per yr.... Thanks

 

[70superbee]

For a simple bolt in kit the drag&flys work really well. You do not have to play with the secondary at all. Iam running the drag&fly setup and it works really well.
Any questions pm me
Rich

 

[Dany Pro]

Who do this kit??

 

[Turk]

Supertorquer

 

[Dany Pro]

OK!

I actually have Heel Clicker in my attak and I don't like!!

What is the difference between the HC and the drag&fly??

 

[Turk]

Dragnfly & heelclickers are both supertorquer. If your set up is not properly dialed in to get the right rpm,s it won,t work.

 

[Dany Pro]

I know they are made by Supertorquer, but what is the difference between the Heel clicker and the drag&fly?

 

[Turk]

Go to supertorquer.com & check em out.

 

[Dany Pro]

I read on the site Turk, but I can't see the difference between each other.

The Heel Clicker is like this.


But how work the drag&fly??

 

[Turk]

The drag n fly,s are similar. They have 3 places to add weight plus the heel. The heelclickers should work great in in your sled if they are properly set up. I think they just need to be dialed in. pay for my flight. i will come out & fix em for ya. Never been out that way. Or; you could tell me your exact rpm,s at wide open throttle from a dead stop to top speed with your exact clutch set up. after knowing that it,s easy to fix unless you have other issues.

 

[monsterattak]

The dialing in is what i dont have time for... Is there a kit that doesn't require dialing in or that the person or company putting it together dials it in before you get it... sorry if these are dumb questions...very new to clutching but i know i need something to get my rrr's up in the midrange.. my sled launches hard and then falls on its face till about 70mph and then starts pulling hard again.... I think i am too heavy for the clutching to pull hard in the mid....

what kind of time does it take to dial it in... a few hrs... a day. two days...?

 

[Turk]

Buy a set of 60 gram drag n fly weights from supertorquer. I can give you a spot on 1 time set up.

 

[monsterattak]

Buy a set of 60 gram drag n fly weights from supertorquer. I can give you a spot on 1 time set up.

I really appreciate the help... I pm'd you...

 

[REDSLED1]

I called hauck and talked to the boys about a set up using my stock weights for my apex. they sent me a set up that works great with a speed shive also bought from them. sofar i'm happy.

 

[VX1R]

Buy a set of 60 gram drag n fly weights from supertorquer. I can give you a spot on 1 time set up.

^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^

That sounds like an offer that you should take. Plug and play.