Anyone know of a better snowflap? I cut the bottom off mine cause it was chewed up, but then started reading about potential cooling issues. Looking at the side profile of the original uncut yami flap, the bottom section of the flap actually tips back away from the sled. I have a hard time believing that this little flap extension defects any snow back into the tunnel, the angles just don't work out that way. If you look at cat or doo flaps, the bottom edge curves back toward the track, much more likely to deflect additional snow back into the tunnel. Anyone ever try to fit one of these flaps on a nytro? Also, was checking out the skinz flex flap, besides the crazy high price, they don't show pics of the side profile. I've only seen one review, on this site, and it wasn't positive.
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
I think you will be fine, agree with your logic. If in doubt put snow on running boards, works well for me in refreeze
Limited snow conditions.
I trimmed mine so I can reverse while on the sled without eating the flap on the 06 Apex
merry Christmas
Yamadoo
Limited snow conditions.
I trimmed mine so I can reverse while on the sled without eating the flap on the 06 Apex
merry Christmas
Yamadoo
yam429
Expert
- Joined
- Jan 18, 2009
- Messages
- 267
- Age
- 51
- Location
- Saint Michael, MN
- Country
- USA
- Snowmobile
- 2009 Nytro XTX, 2010 Vector LTX, 1981 SRX 440, 1989 Inviter, 1991 Snosport, 2004 Snowhawk
- LOCATION
- Saint Michael
Have you looked at getting a snowflap saver from tricked-toys.com?
Daranello
Suspended
yamadoo said:
Nytros dont have coolers on the running boards.... most of its cooling comes from the rad
yes! I have, but I'd need a new flap too point is, I don't think an uncut stock flap offers any advantage over what I've got ( except for people behind me). I'd like a longer flap that is more effective at aiding cooling, plus flap savers.yam429 said:
gregdec1
Extreme
http://www.provendesignproducts.com. They have some sweet ones. If you have a design you want email them and they will put it on.
yamadoo said:
Don't think his apex has coolers under the running boards either.
nickleuci said:yamadoo said:
Don't think his apex has coolers under the running boards either.
I think Apexs do have runnig board mounted cooler from the factory....their system loops around like the SRX did.
