Tunnel Dent and Snow Flap Question

[DeepFrz]

Well I done goofed this weekend. I was going a bit too fast on a freshly groomed trail and skidded into the back of Bieniek's SE, any advice on how to pound this out?




I was also thinking about buying him a blue snow flap for his trouble. Does anyone know if they still sell flaps with this design?

http://www.ebay.com/itm/Brand-NEW-Yamah ... 2315b2c99c

 

[yamaha1973]

good luck to ya... aluminum doesnt like to be bent then bent back

 

[DeepFrz]

haha yeah I've already discovered this. I was thinking about taking the snow flap off and clamping a board to each side of the piece of aluminum.

 

[09nytro]

haha yeah I've already discovered this. I was thinking about taking the snow flap off and clamping a board to each side of the piece of aluminum.

Yes that would work done it before it will pop back out

 

[grizztracks]

Buy a new end cap for the tunnel. I replaced mine for the same reason and it's any easy fix for around $50. Here's the part number: 8GL-21923-00-00

 

[shockwave]

Buy a new end cap for the tunnel. I replaced mine for the same reason and it's any easy fix for around $50. Here's the part number: 8GL-21923-00-00

X2

I have one that is laying around if you want it. I could ship it to you.

 

[raginyamaha]

id start with a hammer.... using ur hand to pound it out would hurt.... someone tapped mine in the back and i just pounded it back out and replaced a few loose rivets..

 

[yam177]

I have replaced that piece more than a few times. Just order it and replace it

 

[LSXM3]

I HAVE A SPARE END CAP FROM MY TUNNEL EXTENSION I DID, PM ME IF INTERESTED

 

[rakor2000]

Try Greatlakesmudflaps.com ....they got tuff..great product....they can do custom stuff to they make sweet snow flaps all makes

 

[canoehead]

Check Fleabay I've seen them there..