Bi-xenon H4 install on FX Nytro

[Dimebag]

Hi,

Im installing a H4 Bi-xenon kit on my 08 RTX Nytro.

Do you connect the "relay-harness" or what its called directly to the battery? Or is there a place that needs the ignition on/engine on to deliver voltage?

I connected it directly to the battery. And the lights came on even with the ignition turned off...

What do you think?

 

[Len Todd]

If you want to get them to turn off with the key then you will have to tie in elsewhere.

You might want to look at THIS thread. Click here!

 

[Dimebag]

Thanks.

I found a connector with 6 red wires and a linkage between these six wires. This connector had +12V with engine running. I used that one to control the extra relay before the hid lights. seemed to work great!

 

[Len Todd]

So how you making out with the new "eyeballs?"

 

[Dimebag]

It looks great

 

[mphmotorwerks]

do you have a wiring diagram you followed or picture.....trying to install now and having problems

 

[mphmotorwerks]

do you have a wiring diagram you followed or picture.....trying to install now and having problems

 

[Len Todd]

mphmotorwerks

If you could fill in you signature with your sled's year, model and list your mods, maybe we can help you.

 

[Dimebag]

do you have a wiring diagram you followed or picture.....trying to install now and having problems

Hi. Did you figure it out? If not PM me and ill try to make a wiring diagram after work.

Good luck.