Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
Has anyone done this ?
number1kyster
TY 4 Stroke God
Limiter straps? Put a block of wood under the track directly under the center shock. That will give you the slack you need.
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
I did that , but there is very little room to get your hands and tools in at the bolts and nuts .Limiter straps? Put a block of wood under the track directly under the center shock. That will give you the slack you need.
Maybe I am not as nimble as I used to be .
WinderFab
TY 4 Stroke God
- Joined
- Mar 1, 2009
- Messages
- 1,862
- Age
- 46
- Location
- Woodbridge, ON
- Country
- Canada
- Snowmobile
- 2020 Sidewinder Ltx GT
Do u want to shorten or lengthen the straps ?if you want to lengthen them you don’t need to put a block under the front part of the skid just lift the back of the sled up to make it easier and do one strap at a time.
0degC
Pro
- Joined
- Jun 5, 2009
- Messages
- 188
- Location
- Sudbury, Ontario
- Country
- Canada
- Snowmobile
- 2023 SRX, 2017 XF 9000
It’s a bit hard to get at but allot easier than removing skid. If you have a way to lift back of sled off the ground and use a big block under front of track gives you a bit more room.I did that , but there is very little room to get your hands and tools in at the bolts and nuts .
Maybe I am not as nimble as I used to be
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
I did that , but there is very little room to get your hands and tools in at the bolts and nuts .
Maybe I am not as nimble as I used to be .
shortenDo u want to shorten or lengthen the straps ?if you want to lengthen them you don’t need to put a block under the front part of the skid just lift the back of the sled up to make it easier and do one strap at a time.
WinderFab
TY 4 Stroke God
- Joined
- Mar 1, 2009
- Messages
- 1,862
- Age
- 46
- Location
- Woodbridge, ON
- Country
- Canada
- Snowmobile
- 2020 Sidewinder Ltx GT
Then do what 0degC said, or raise the rear up enough to get a jack underneath the centre shock and while sled is raised just jack it enough to shorten the straps. Fairly easy.
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
Without my son here to help me , I have become a semi useless tinkerer , unless there is unobstructed access to the job at hand ! (like track tightening )Then do what 0degC said, or raise the rear up enough to get a jack underneath the centre shock and while sled is raised just jack it enough to shorten the straps. Fairly easy.
Seeing as my only possibility of more riding this year , will be the Cochrane to Geraldton corridor , I will probably leave the straps till next year , as I may want the less ski pressure for those early morning spring riding crunchy trails .
SAB1
TY 4 Stroke Junkie
- Joined
- Mar 1, 2011
- Messages
- 545
- Location
- Tuftonboro NH
- Country
- USA
- Snowmobile
- 2017 Sidewinder LTX SE
2010 Vector GT
2006 Apex
Very easy to do with a 4x4 under the skid as mentioned above. We did mine in a parking lot in zero degree weather in about 8 minutes tops
Similar threads
- Replies
- 4
- Views
- 495
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.