**APEXGT**
Veteran
Just got my sled back from the shop. It was dyno @ 178hp. I was wondering if any of you guys would point me in the right direction for clutching for 660 ft drag racing ( Ice and Snow) 
Clucthing for 178+hp Apex GT
- Thread starter **APEXGT**
- Start date
Turk
Tech Advisor
Do you have access to heelclickers; supertips or heavy hitters? I can get ya close with any of those 3.
**APEXGT**
Veteran
I have Dalton 62's with dalton red secondary and red primary and a 52/40 helix. Still trying to setup the weights. Would heelclickers be the better way to go, I like the idea of the screws instead of the rivits. What setup should I use or buy???
Turk
Tech Advisor
The heavy hitters are the easiest weights i have ever used to tune a sled. The 38/20 heelclickers will be fine too but require a lot more monkeying around. I have also used supertips & they are ok but can be a little tricky to get just right. I would say any of the above weights plus they will work with that helix. Get what ever weight you think will work the best & you can get a good price on.
Mikey
TY 4 Stroke Junkie
- Joined
- Apr 13, 2003
- Messages
- 615
- Reaction score
- 2
- Points
- 893
- Location
- Thunder Bay Ontario
- Country
- Canada
- Snowmobile
- 03 RX-1
What mods did you do to get 178?
**APEXGT**
Veteran
My mods are listed in my signiture.
GotJuice
Expert
interested in your cam
do you have any more info on your cam and where you bought it from? I've had good results with Hauck weights and a shockwave helix but I'm not drag racing on ice, usually up short inclines in 2 ft. of powder.
do you have any more info on your cam and where you bought it from? I've had good results with Hauck weights and a shockwave helix but I'm not drag racing on ice, usually up short inclines in 2 ft. of powder.
**APEXGT**
Veteran
Contact the guys at Fundy Performance. (dynoray)
