apexhisnhers
Newbie
have 06 and 07 apex er, want opinion's on clutch kits...do not want to sacrifice bottom - mid - or top end. heard Ulmer is the only way to go. Anyone have specs? have a bee we want to take the stinger out of!! 
ottawa, ontario
ottawa, ontario
Swiss Sledder
TY 4 Stroke God
- Joined
- Apr 18, 2003
- Messages
- 2,792
- Reaction score
- 6
- Points
- 816
- Location
- Bidford on Avon, United Kingdom
- Website
- www.mi5.gov.uk
Why don't you just ask him as he is a site member and has his own forum section?
Woodysattack
Veteran
Ulmer kit
Running 07 attack with pro-lines clutch kit. Just got done doing some testing in a 1000ft with my computer setup. Tried the clutch kit with the high engagement spring compared to the low engagement spring. Perfect test conditions. With the low engagement spring I gained almost 2 tenths in the distance compared to the high engagement spring. I hooked up good with both springs but the lower one was still faster. Very happy with this clutch kit. John at pro-line is very helpful. I'm not saying ulmers is a bad kit I have not tested his yet. But people that tested both said pro-line is just a bit faster.
Running 07 attack with pro-lines clutch kit. Just got done doing some testing in a 1000ft with my computer setup. Tried the clutch kit with the high engagement spring compared to the low engagement spring. Perfect test conditions. With the low engagement spring I gained almost 2 tenths in the distance compared to the high engagement spring. I hooked up good with both springs but the lower one was still faster. Very happy with this clutch kit. John at pro-line is very helpful. I'm not saying ulmers is a bad kit I have not tested his yet. But people that tested both said pro-line is just a bit faster.
i have an ulmer kit and have taken alot of stingers out of bee's
radta7
VIP Member
- Joined
- Dec 8, 2005
- Messages
- 273
- Reaction score
- 9
- Points
- 993
- Location
- Northern IL
- Country
- USA
- Snowmobile
- 2020 Sidewinder LT-X GT
Top ones spoken of are: Ulmer stage 2, Pro line and Fixmotorsports R5.
Any one have full comparo's?
Any one have full comparo's?
nate007
Lifetime Member
- Joined
- Dec 25, 2006
- Messages
- 2,770
- Reaction score
- 60
- Points
- 1,333
- Location
- Iowa City, Iowa
- Country
- USA
- Snowmobile
- 1. '06 Apex -twin screw
2. '04 Redline Revolt 800
3. '09 Nytro XTX - twin screw
Bender makes an awesome kit as well. They use the Heel Clicker weights. I have it in my '06 GT and love it. It was very easy to install, and Bender has been around for a long time. Just a phone call to them and it make you feel good about their product(s) services.
Nate
Nate
snolover
Veteran
- Joined
- Dec 1, 2004
- Messages
- 45
- Reaction score
- 0
- Points
- 686
I have rtx 2007 stock gearing 22/38 i run 128" track ripsaw 1.25" 153 studs 1.450 woodys .
I have ulmer stage 2 since two years now if you go with this kit you gone find that is very strong on take off (almost too strong ) I have better results with 24/38 less spins more hook up on the snow
I have ulmer stage 2 since two years now if you go with this kit you gone find that is very strong on take off (almost too strong ) I have better results with 24/38 less spins more hook up on the snow
mclarenyamaha
Pro
i have the r5 from fixpowersports, works reslly good. easy to recomend.
Fix Power Sports here and love it after 1000 miles no complaints !!!!!!!!!!!
Tom
Tom
