09nytro
TY 4 Stroke God
That's the best thing to do , is one thing at a time !
I will look and see if I have some 10-66 ......
I got that pin kit from SLP to run the polaris weights in my nytro then went to the MTX weights , those are nice too may want to look into them as well !
I will look and see if I have some 10-66 ......
I got that pin kit from SLP to run the polaris weights in my nytro then went to the MTX weights , those are nice too may want to look into them as well !
stingray719
TY 4 Stroke God
09nytro said:
I think you are refering to the 8FS weights with the flat profile and I agree. I just cannot get enough weight off them to run above 10k altitude, so I am going to make a set of stock Viper weights into a flat profile as I don't like rpm hnting of any kind. The 8DN got rid of most of the rpm hunting but still get higher revs at take off due to the ramp on the weights.
I found the 8FS with flat profile was almost a must have for all 3 of my previous boosted Yamahas. Your mileage may vary.
09nytro
TY 4 Stroke God
Nope talking about Polaris weights in a Yamaha clutch !
