Clutch Rollers

[newfie09xtx]

14.5 rollers
8CR-17624-00-00

YPY SPRING
90501-581L5-00

Is that the right part # for the rollers? I come up with 8FG-17624-00-00.

RadianGuy has the right numbers. He just installed them in my nytro.

 

[radianguy]

14.5 rollers
8CR-17624-00-00

YPY SPRING
90501-581L5-00

Is that the right part # for the rollers? I come up with 8FG-17624-00-00.

RadianGuy has the right numbers. He just installed them in my nytro.

The difference between the 8CR and the 8FG is the material of the rollers, one is duralon the other is vespel. The 8CR's are a bit cheaper.

 

[hyprst]

14.5 rollers
8CR-17624-00-00

YPY SPRING
90501-581L5-00

Is that the right part # for the rollers? I come up with 8FG-17624-00-00.

RadianGuy has the right numbers. He just installed them in my nytro.

The difference between the 8CR and the 8FG is the material of the rollers, one is duralon the other is vespel. The 8CR's are a bit cheaper.

Thank you for the clarification! Which material has a longer life span?

 

[yukon yamaha]

There is also an 8mm and 9mm diameter roller , keep an eye out for that too

 

[extreman1]

roller change

if u change to the 14.5 gram rollers, what effect would changing the helix to a 51/43 have??

 

[radianguy]

14.5 rollers
8CR-17624-00-00

YPY SPRING
90501-581L5-00

Is that the right part # for the rollers? I come up with 8FG-17624-00-00.

RadianGuy has the right numbers. He just installed them in my nytro.

The difference between the 8CR and the 8FG is the material of the rollers, one is duralon the other is vespel. The 8CR's are a bit cheaper.

Thank you for the clarification! Which material has a longer life span?

I'm not sure, I took a set of duralon rollers out of my 2000 700 venture to try in my XTX, the venture has just over 20,000 km so I say they last a good while, lol.
I have a new set to put in my XTX, I will be putting the used ones back in the 700 venture.

 

[newfie09xtx]

14.5 rollers
8CR-17624-00-00

YPY SPRING
90501-581L5-00

Is that the right part # for the rollers? I come up with 8FG-17624-00-00.

RadianGuy has the right numbers. He just installed them in my nytro.

The difference between the 8CR and the 8FG is the material of the rollers, one is duralon the other is vespel. The 8CR's are a bit cheaper.

Thank you for the clarification! Which material has a longer life span?

I'm not sure, I took a set of duralon rollers out of my 2000 700 venture to try in my XTX, the venture has just over 20,000 km so I say they last a good while, lol.
I have a new set to put in my XTX, I will be putting the used ones back in the 700 venture.

Radianguy, your Mods are taking up too much room! LOL How'd ya get them to fit??

 

[carpenter]

8fg is the correct rollers

 

[toyota4runner]

There's a good chart explaining the roller part numbers and sizes in the technical pages of TY Home at the top left of the page or TotallyYamaha.com. Go to technical pages, snowmobile tech, clutches and jetting, and then down to rivets and rollers

 

[radianguy]

Radianguy, your Mods are taking up too much room! LOL How'd ya get them to fit??

Removed all of the comma's! LOL