AttakDog
TY 4 Stroke Junkie
Has anyone vented the clutch side some more on there Apex/Attak? Interested in possibly doing it to my Attak and RX1 to cool the clutches a little more. Post pics if you have them. Thanks
APEX 06
TY 4 Stroke God
- Joined
- Apr 30, 2009
- Messages
- 4,016
- Location
- Sheboygan, WI
- Website
- www.sheboyganyamaha.com
- Country
- USA
- Snowmobile
- 09 Nytro XTX, 08 Apex Mtx
I did it once on an RX because I hit a tree branch that pierced the body panel. I made a mesh cover like that and one night all alone at 2 am in the upper UP I almost found myself walking home 4 miles because snow had build up inside over the period of a hard day and night of riding on new loose snow. I stopped at a friends place for a bit and left, made it a couple of miles and the belt started to slip. Finally it would not bite at all.
I tried to dry it out but it was so packed with frozen snow I couldn't without pulling the entire panel. I cleaned it out and pulled the belt and used my shirt to clean the parts dry.
I tried to dry it out but it was so packed with frozen snow I couldn't without pulling the entire panel. I cleaned it out and pulled the belt and used my shirt to clean the parts dry.
fourload
TY 4 Stroke Master
These clutches really don't run hot at all unless they aren't tuned right. Touch a Ski Doo clutch after riding a while and compare. Now they get hot..
obile
Pro
http://xxxmodrods.com/_mgxroot/img_1192 ... 28_326.jpg
http://xxxmodrods.com/_mgxroot/img_1192 ... 32_327.jpg
just put these on mine. super fine pre filter on all the clutch side vents behind the regular mesh. i could take some pics and post what i did if you like.
http://xxxmodrods.com/_mgxroot/img_1192 ... 32_327.jpg
just put these on mine. super fine pre filter on all the clutch side vents behind the regular mesh. i could take some pics and post what i did if you like.
