SPARTANVIPER
Newbie
Was looking for some help clutching 2004 Warrior with ECP kit. I cant seem to get the RPM's up to 10,500 where Freddie suggests. Does anyone have any set-up's that will pull the R's with helix/rivets/springs. Any help would be appreciated. 
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
Depending on what you have right now for clutching, you will need to purchase the clutch kit designed specifically for my air kit. I can help you with this and so could Matt from The Speedshop.
Freddie Klies
www.easterncycleperf.com
Freddie Klies
www.easterncycleperf.com
yamahajunkie
TY 4 Stroke Junkie
what rpm are you at now?
rxwhopper
TY 4 Stroke Guru
my inner rivit was removed and it bangs on 10500 all the way.i have a cpr kit with hh weights and they really dont seem any faster than stock setup i have. infact i think the stocker has more legs
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
rxwhopper... I find it funny that a lot of riders think the same. My experience however has been that the clutch kit designed specifcally for my Air Kit works better. But once again there are Monday, Wednesday and Friday sleds.
Freddie
Freddie
rxwhopper
TY 4 Stroke Guru
, i know what you mean. this one was bought from the speedshop for a ecp equipped sled.it seems to hit rpm fine but sometimes over revs past 10500 a bit
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
rxwhopper said:
That might be due to track spin.
RX1Jim
TY 4 Stroke Junkie
Who is this supertuner2 person? Some jokester coming on here to annoy Freddie? What is up with this? Freddie has been a terrific asset to us. If someone is having problems with his products, call him.
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
RX1Jim said:
Jim...I haven't seen any poster by supertuner2. E-mail me a link to KliesECP@sbcglobal.net and I will look into it.
Freddie
SUPERTUNER
TY 4 Stroke Master
- Joined
- Aug 16, 2003
- Messages
- 1,257
- Reaction score
- 2
- Points
- 691
- Location
- Waterbury, Connecticut
- Website
- www.easterncycleperf.com
Nevermind Jim. Allen Umler PM'd me and told me that they deleted all his posts. I know who this yahoo is. He known on the AMSNOw racing forum as "rotax1140 the flo" I think. Here he also posts as rotax 1140. See his "hi" comment in thi section. I don't even know this yahoo and he bashes me every time someone asks me a tech question on AMSNOW.
He better hope he never meets me. He won't like me very much. 3 years a go, I gave a friend of his from Quebec a little tadal' at Atco Dragway in southern New Jersey. This "ZOL" thought he was the dragbike police. He won't be saying anything stupid about me anymore on the web. Flo will get his too if he provokes me enough.
Freddie
He better hope he never meets me. He won't like me very much. 3 years a go, I gave a friend of his from Quebec a little tadal' at Atco Dragway in southern New Jersey. This "ZOL" thought he was the dragbike police. He won't be saying anything stupid about me anymore on the web. Flo will get his too if he provokes me enough.
Freddie
