wshellrider
Extreme
Going across the lake this weekend my 2012 nytro xtx one of the cylinders shut down. I shut it off and re-started, still running on 2 cylinders and code 34 flashing.
Got it back to the cabin, moved the coils around and changed #2 spark plug. once started back up, it would run on 2, occasionally the 3rd would start then stop. No check engine light or code flashing.
Getting a new coil, of course the dealer has to order it in.... is there anything else I should be looking at? All new plugs were put in at the beginning of the season (maybe 100 miles on them)
Got it back to the cabin, moved the coils around and changed #2 spark plug. once started back up, it would run on 2, occasionally the 3rd would start then stop. No check engine light or code flashing.
Getting a new coil, of course the dealer has to order it in.... is there anything else I should be looking at? All new plugs were put in at the beginning of the season (maybe 100 miles on them)
grizztracks
Tech Advisor
- Joined
- Feb 24, 2005
- Messages
- 3,116
- Reaction score
- 968
- Points
- 1,753
- Location
- Scio, NY
- Country
- USA
- Snowmobile
- FX Nytro RTX, RS Vector, SR Viper RTX SE
Check the wire harness for damage under the upper steering post mount. It's a common rub through spot. There also was a problem with the harness rubbing on the side plate behind the primary clutch
wshellrider
Extreme
Thanks Grizz, I will check it out this weekend.
