Alatalo
TY 4 Stroke Master
The 2008 and 2009 FX Nytro drive shafts have got different part numbers (8GL-47511-00-00 and 8GL-47511-10-00). Does anybody know what the differences are and if they are interchangeable...? I have heard something about an updated lower sprocket bolt, is the shaft updated because of this...?
they look the same to me, but may be some subtle change.
big_red1a
Expert
Maybe the diameter???? I have heard that the 09 apex uses different size driver to fit on the jack shaft
garserio
Expert
- Joined
- Nov 30, 2004
- Messages
- 309
- Age
- 49
- Location
- Fairport, NY
- Country
- USA
- Snowmobile
- 2014 SR Viper
2001 AC Z370
2006 AC F120
Alatalo said:
Typically the 3rd element of a Yamaha P/N is a configuration code. For instance, a colored part will have the same P/N except the blue version might be a -00, the red a -01, the black a -02, etc. For a hard part like a shaft, they might have changed a plating spec, a tolerance, a metal alloy, etc. The parts are geometrically the same, but there is something different that you cannot see. The new part (in this case -01) would be backwards compatible to the -00. It is quite likely that the -00 is no longer available and replacements for a -00 would have to be the -01.
rxrider
Jan-Ove Pedersen
- Joined
- Apr 25, 2003
- Messages
- 7,355
- Age
- 59
- Location
- Lakselv - 70N & 25E
- Country
- Norway
- Snowmobile
- 2014 Phazer XTX, 2013 Phazer RTX, 2008 Apex RTX, 2007 Warrior, 2006 Attak
xxx-xxxxx-10-00 tells that it is a upgraded part that replaces the xxx-xxxxx-00-00 part, thus the parts are interchangeable 100%. To find out exactly what the upgrade consist of you have to have access to the Yamaha dealership network system, your dealer should be able to look that up... if they have the time...
