Externally mounted intercooler???

[crazy680]

Why not have the intercooler on the outside of the sled?

Just remove the left side panel, build a aluminum enclosed clutch cover with a long narrow intercooler on top of it..

Should work way better than those intercooler's that are under the hood with all that heat and no airflow. You would actually get a good airflow over as well as the cooling from snow.

Might need a different custom hood that doesn't cover up the left side wher the intercooler would be..

I'm going to try this on my sled.

 

[snowy1]

If you are going to install a custom hood just use a diamond S screen hood and you don,t need to fab up a new innercooler and it gets rid of all the under hood heat I am three main jet sizes higher than cpr recomends for there front mount and I am sure its due to no under hood heat which means more hp.

 

[LazyBastard]

Another option is to go with a rear mount turbo, since the tube goes above the track to cool the air on the way forward.

 

[crazy680]

Right now I dont have a intercooler on the sled but I want to build one..

Also you would have the cooling effect from snow especially on those deep powder days.. And for making power the cooler the air the better.

 

[slymax]

Precooler