mcamzr
TY 4 Stroke Guru
Well like most Nytro owners I have some play in the ball joints and a ton of play in the Ski bolt holes in the spindals. I thought that I would just go ahead and do A-arms while I was at it. My question is, who has the best alternative to the crapy oem bushings to do the whole front end?
natedawgedog
TY 4 Stroke Guru
- Joined
- Feb 5, 2011
- Messages
- 900
- Reaction score
- 32
- Points
- 608
- Location
- DLG, Ak
- Country
- USA
- Snowmobile
- something from 2019!
ulmer racing oilite bushings... yamaha has oilite bushings too... nothing better
PoliticalMachine
Pro
- Joined
- Oct 20, 2010
- Messages
- 155
- Reaction score
- 0
- Points
- 716
- Location
- Valparaiso, IN
- Country
- USA
- Snowmobile
- Yamaha
For the ski bolt holes go with UPBUSHMAN's bushing kit, its made from stainless steel and is a thicker wall so it adds strength to the bottom of the spindle which can break. Check in the phazer section for his thread. Plus you will never have to worry about rusted spacers and washers to try and remove every season for maintenance.
fxnytro1050
Expert
I went and done my aarms with the yamaha oilite bushings. Just as cheap as the plastic and ulmer racing bushings. After all season i still dont have excess play in the front end.
NFLD-Nytro
TY 4 Stroke Junkie
natedawgedog said:
X2
