Front heat exchanger and studs

[ShootToThrill]

Has anyone installed 1.450 woodys in their nytro and had the track ratchet then check for marks or holes in the front exchanger? I want to use a long of a stud as possible. Any feedback on this is appreciated.

 

[ShootToThrill]

I can't believe no one has put in 1.450 studs.

 

[kingedwards99]

I put 96 1.52s redtips on my sled, and they work well!

 

[skyboz]

I have 1.375's and about one inch above the heat exchanger, the studs have clipped the flat metal strip up there from ratcheting!!!

 

[ride -4-fun]

i have 1.325 144 down the middle and noticed same thing ,metal above cooling being hit

 

[Yamahnator]

I have 1.375's and about one inch above the heat exchanger, the studs have clipped the flat metal strip up there from ratcheting!!!

Same... So make sure that track stays adjusted.

 

[ShootToThrill]

Thanks for the input. I'll keep an eye on the track tension for sure.