Fuel Shut Offs

KEITHFD

Extreme
Joined
Nov 12, 2003
Messages
124
Reaction score
0
Points
566
Location
Haverhill,MA
Website
www.haverhillfirefighters.com
Has anyone found a good way to install fuel shutoffs? I was told never to trailer my RX-1 with a full tank, I think its even in the manual. I was also told never to leave the tank un-filled due to condensation problems. What to do?
 
I also put mine near the steering support in the 90 degree bends. Got the universal 90 degree shut-off valves from Dennis Kirk.
 
You can have a look at my fuel shut-offs in the Sled Garage. Look for topic name "ToddMeister's Sleds"
 
POWERHAULIC said:
Just cut the line close to the pumps, they will be self supporting then.

That's what I did and have not had any problems
 

Attachments

  • fuel_valve3.jpg
    fuel_valve3.jpg
    78.8 KB · Views: 259
I'm guessing that with EFI, there will still be a "do not trailer with full fuel" requirement; which translates to aftermarket installation of fuel shut-off valves. Does anyone know if this is going to be addressed with the 06 models?
 
I'm guessing that with EFI, there will still be a "do not trailer with full fuel" requirement; which translates to aftermarket installation of fuel shut-off valves. Does anyone know if this is going to be addressed with the 06 models?

The Fuel Injectors are your shutoff!
 


Back
Top