sniperviper
TY 4 Stroke Junkie
Anyone who have tested a gt against the fx? Know that the gt has higher gearing than the fx. Just wondering how the fx would be with gt gearing... Will I loose accelration or....? Only fx and mountain light in my area....
I bought a gt and was thinking about gearing it the same as the fx, I am also currious about what I would gain in the lower end. 50% of my riding is very aggresive on the trail and 50% is breaking a trail in powder? My Buddies all have ski doo 600 REVs. Anybody have an opinion?
I ordered the 19 tooth gear for my FX - kind of a cross between the stock 20 of the GT & 18 of the FX. Still waiting for it, currently on backorder.
teerex
Expert
How high a gearing is it possible to order? For the sake of turbo power 
BV1
Expert
Very happy with the GT gearing, saw 140 km/hr today. Wouldnt change it to the FX gearing, I am happy with my low end performance.
-Steve
-Steve
sniperviper
TY 4 Stroke Junkie
BV1 said:
How does it perform uphills in some powder? does it spin the track or is it dying out?
SharkAttak
TY 4 Stroke God
yamy07 said:
that's interesting, let us know how you make out, tryed to do a comparision if you can before and after
Anyone know if a 21 tooth gear from a RX1 will fit?
- Joined
- Apr 17, 2003
- Messages
- 5,347
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
Hoping to do comparison between 18-19-20 top tooth gears. With clutched FX and 18/41 gears clutches fully locked up saw speedo indicated 98 mph @ 12,100 or a little over 87 mph actual speed on snow packed road running 1/2-3/4 mile. With 18/41 gearing low end response is great and it gets to 70 mph fairly quick.
RX-1 top tooth gears will not fit due to different shaft diameter.
RX-1 top tooth gears will not fit due to different shaft diameter.
