Great work guys looks pretty impressive!
looks great keep up the good work
FastZ said:
Don't think we'll be at the Weenie Roast this year. We went up trail riding for a few days so we won't have time to get ready and make the drive. It was nice seeing you guys again! We'll be in touch soon!
P.S. I will be waiting to here the results from out there as both your sleds look to be ready and we know they have the power if the track conditions are right. Good Luck fellas!
onestopjim
TY Advertiser
- Joined
- Feb 22, 2006
- Messages
- 505
- Reaction score
- 46
- Points
- 838
- Location
- Howell MI
- Website
- www.onestopperformance.com
Looks good Howard, are you bringing this to phatman..
looking forward to some good racing... see ya soon
looking forward to some good racing... see ya soon
We hope to bring it there. Lack of places to test this year is getting old. We'll be there with something though. Look forward to seeing your Skidoo run and some good racing from everyone.
Rx-377
Newbie
Thanks for all the compliments...and thank you Wildman for all your help with this project. We are going to the phatman for a few shake down passes on this sled, should be fun!!!
Howard
Howard
DaveForsyth
Newbie
- Joined
- Apr 28, 2011
- Messages
- 14
- Reaction score
- 0
- Points
- 61
Apex hiding in Nytro
Looks good guys!
Lots of work goes into these type of sleds that most people can never see.
Looks good guys!
Lots of work goes into these type of sleds that most people can never see.
nolimits
Newbie
howard , another great looking sled !!
did you get it out this weekend ?
jim wentworth
did you get it out this weekend ?
jim wentworth
Everything was cancelled again this weekend. We were up there and ready to do some shake down passes however.
The good news is the owner was actually able to see his sled in person & hear it run as he made a long drive up. Not as happy as riding it but us Michigan racers just can't seem to catch a break this year.
Thanks for compliments again and yes they are a lot of work for sure but its well worth it when you see the finished project & a happy customer.
The good news is the owner was actually able to see his sled in person & hear it run as he made a long drive up. Not as happy as riding it but us Michigan racers just can't seem to catch a break this year.
Thanks for compliments again and yes they are a lot of work for sure but its well worth it when you see the finished project & a happy customer.
Graphics Installed!
Bring this back to the top.
After no ice last year we were able to finally get the Nypex out last weekend and do some shakedown runs! I have to say this thing is a beast! We are running a Hurricane built motor with our turbo system and although we were skeptical at his power claims he has made us believers. Thanks Dave!
Took it to a race and ran it at low boost and laid down a 5.10 in 660' off the trailer with 200 hp left on tap this sled should rip. Unfortunately we had an ECU internal failure that hampered us from running again (faulty ecu has been replaced under warranty). The sled will be for sale in the coming weeks after we run it at a couple more races and dial it in. This sled will run deep into the 4's all day and there was absolutely no money spared on this build.
This is a test pass at 21#'s (low boost).
http://www.youtube.com/watch?v=BsJTKh5a ... 6g&index=2
After no ice last year we were able to finally get the Nypex out last weekend and do some shakedown runs! I have to say this thing is a beast! We are running a Hurricane built motor with our turbo system and although we were skeptical at his power claims he has made us believers. Thanks Dave!
Took it to a race and ran it at low boost and laid down a 5.10 in 660' off the trailer with 200 hp left on tap this sled should rip. Unfortunately we had an ECU internal failure that hampered us from running again (faulty ecu has been replaced under warranty). The sled will be for sale in the coming weeks after we run it at a couple more races and dial it in. This sled will run deep into the 4's all day and there was absolutely no money spared on this build.
This is a test pass at 21#'s (low boost).
http://www.youtube.com/watch?v=BsJTKh5a ... 6g&index=2
Last edited by a moderator:
Its been awhile and we were finally able to get this beast out and run it for the customer. Machine is starting to turn the corner as far as suspension and clutching. We were able to to run 4.80's even though we were having some slow 60's. There's .200 left in the 60's and all kinds of power left if the conditions warrant!
Big Thanks to Hurricane Performance for making us believers on his engine package. Its a mule with a conservative tune up (went a 4.90 at 23#'s)!
Excited to see what grass season holds for it. Customer gave the okay to lighten it up and make it into an Outlaw sled. We took a third in Outlaw out of 17 sleds at the Anchor Bay Bash, got beat by a hole shot for 2nd. Not bad for a stock chassis sled that has about 15 passes on a new combination.
http://www.youtube.com/watch?v=EXj9MSJkXFI
A little to much transfer in testing!
http://www.youtube.com/watch?v=GZyEkVk_Ljo
Big Thanks to Hurricane Performance for making us believers on his engine package. Its a mule with a conservative tune up (went a 4.90 at 23#'s)!
Excited to see what grass season holds for it. Customer gave the okay to lighten it up and make it into an Outlaw sled. We took a third in Outlaw out of 17 sleds at the Anchor Bay Bash, got beat by a hole shot for 2nd. Not bad for a stock chassis sled that has about 15 passes on a new combination.
http://www.youtube.com/watch?v=EXj9MSJkXFI
A little to much transfer in testing!
http://www.youtube.com/watch?v=GZyEkVk_Ljo
Attachments
Last edited by a moderator:
