Has anyone used a 2stroke primary on their Nytro?

[Beenba]

The clutch sheaves on my nytro are shot after 18000km.

I have a good condition vmax 700 clutch, looking at the fixed sheaves they similar, but you can see the moving sheave has been beefed up at the webbing/gussets on the nytro.

Curious to know if anyone's used a 2 stoke clutch with success? I'd swap weights/rollers/spring from the nytro.

 

[maim]

put one on an rx and had no problems until sled was wrecked.

 

[Stubbs]

Just watch the cam arms. The 4 stroke clutches have an open spider so the the stock flat arms don’t contact it. You don’t need to worry about that if you are using aftermarket weights with a more aggressive curvature than stock.

 

[shadow44]

Mark, Iantomasi put one from an SRX on mine when it cracked but I'm not sure if he used the sheaves from the Nytro....I know he used the shaft.

 

[Beenba]

thanks guys, I got a set a sheaves in good shape off another nytro and going to machine them.

That's a good point about the spider, you can see the nytro one has clearance pockets and the 2 smoker doesn't.

you could probably get away with using the 2 stroke sheaves and ntyro spider.