MikeAttakNYC
Expert
my friend has an 08 nytro and is curious if anyone makes or has aftermarket bars. He likes the flex bars for atvs does anyone know of a similar bar available for sleds?
BLUEBALLER
Expert
- Joined
- Jan 29, 2005
- Messages
- 420
- Reaction score
- 3
- Points
- 491
Re: Handlebars
If he wants the same effect as the flex bars, take a look at isovibe or rox. They both make antivibe risers that will work with the stock handlebars. I've got rox a rox 2" antivibe on mine, works slick.
If he goes with the flex bars - make sure they are 7/8" diameter and they should work with the existing hardware.
APEXgtANDaBANSHEE said:
If he wants the same effect as the flex bars, take a look at isovibe or rox. They both make antivibe risers that will work with the stock handlebars. I've got rox a rox 2" antivibe on mine, works slick.
If he goes with the flex bars - make sure they are 7/8" diameter and they should work with the existing hardware.
lucky_7
TY 4 Stroke Guru
You can look at the RSI bars, and you can locate them on www.sledsolutions.com.
tomMTX
Pro
- Joined
- Mar 18, 2008
- Messages
- 131
- Reaction score
- 0
- Points
- 226
- Location
- Bellevue, WA
- Website
- www.omlb.com
I just installed a set of RSI tapered Race bars on my 08 Nytro MTX, quality stuff.
NyTrOMaNIaC
TY 4 Stroke Master
How's the heat to those ??? handwarmers, tomMTX ?
snirt
Extreme
how about the throttle ,looks like it would get pretty tight on a left turn?
tomMTX
Pro
- Joined
- Mar 18, 2008
- Messages
- 131
- Reaction score
- 0
- Points
- 226
- Location
- Bellevue, WA
- Website
- www.omlb.com
NyTrOMaNIaC said:
I installed (well with some help from Ruffy) some RSI Hi Power Heater Elements. Still waiting for the snow to put them to the test, but they are really warm in my garage.
lucky_7
TY 4 Stroke Guru
How was the install for the grips/heating elements, and also the wiring?
