H3L10W
Newbie
- Joined
- Feb 26, 2026
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- NH
- Country
- USA
- Snowmobile
- 2003 Yamaha Rx-1
I have a 2003 RX1 that cuts out/ bogs above 4k rpm. If I put the choke on it get a bit more power but still maxes out at 5k ish. It also idles low and rough without the choke. I have cleaned the carbs two times the jets are clear. I am not running an airbox right now, the sled came without it. Will not running an airbox cause this bogging? there are 4 vacuum hoses that come off the top of the carbs that aren't hooked up to anything.
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,686
- Reaction score
- 4,292
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
You need the airbox for it to run right.
H3L10W
Newbie
- Joined
- Feb 26, 2026
- Messages
- 2
- Reaction score
- 0
- Points
- 1
- Location
- NH
- Country
- USA
- Snowmobile
- 2003 Yamaha Rx-1
Why is that the case? sorry if that's a really noob question. Ive test run jet skis and other sleds without the airbox and its never affected how they run.
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,686
- Reaction score
- 4,292
- Points
- 1,853
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
Has to do with the CV carbs.
Almost any machine, atv, motorcycle etc, with a CV carb will not run properly without the airbox.
Almost any machine, atv, motorcycle etc, with a CV carb will not run properly without the airbox.
- Joined
- Jun 1, 2004
- Messages
- 8,017
- Reaction score
- 2,122
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
if you want to run with kn pod filters , you need to use the yellow aftermarket cv springs for it to behave properly. did it for sappling killers 04 rx1 mod sled.
Similar threads
- Replies
- 15
- Views
- 3K