How do I know what model my sled is?

[freeflow90]

Went to start my sled yesterday and it wouldnt. i noticed gas leaking everywhere out of the carbs. I pulled the carbs off tonight and turns out one of the carb heaters broke off.I went online to see what the price was and noticed there are like 6 different options. ER MT etc...

this is my sled.. 03

the leak!

 

[APEX 06]

The Vin number will till you what it is. But if its for a RX-1 it will all be the same.

 

[theCATman]

Well it's not an MT (mountain)

Does it have reverse? If so, it's an RX-1 ER. If not, it's a plain RX-1.

As APEX06 said, the carb parts will be the same regardless of what model.

 

[yox185]

While you have them off take them apart and clean. I bet the leak is from a stuck float valve.

 

[freeflow90]

Yes it has reverse so its a ER cool. I am going to clean them and I will check those floats for sure! thanks for the help

 

[Smokum]

Anybody have a write up for cleaning the carbs? I've done it on many other older sleds, but never on a 4 stroke or Yamaha. Any help would be appreciated.

 

[APEX 06]

Done the same way.

 

[Super Sled]

This should get you started:

http://www.totallyamaha.net/forums/show ... hp?t=43118

http://www.totallyamaha.com/snowmobiles ... _carbs.htm

http://www.totallyamaha.net/forums/show ... ge=1&pp=10

To see the pics you'll have to get an acct started on the 2 stroke side -- the original Totallyamaha. Lots of Yamaha carb information over there.