webzwarrior
Newbie
My exhaust shield is rattling pretty bad, i know you can take them off with out hurting anything. How do you remove the seat though? if anyone has some pictures that would be cool. Thanks guys
- Joined
- Jun 1, 2004
- Messages
- 7,835
- Reaction score
- 2,034
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
removing the seat is very easy.
http://corey.cabler.com/pics/LIT-12618-02-28%20rx-1.pdf
pics in ther of order of dissassembly. i suggest removing the exh tips 1st. the bolts are at 12, 4, and 8 (clock face reference).
if it is the one in the tunnel, you need to drop the rear suspension to get it out of there.
http://corey.cabler.com/pics/LIT-12618-02-28%20rx-1.pdf
pics in ther of order of dissassembly. i suggest removing the exh tips 1st. the bolts are at 12, 4, and 8 (clock face reference).
if it is the one in the tunnel, you need to drop the rear suspension to get it out of there.
webzwarrior
Newbie
its a 04 rx warrior, do i have to drop the suspension?
no just the rear bumper fascia which has 2 10mm bolts on each side of the tunnel under the exhaust covers. Pull the exhaust tips for easier re-install. There are 2 long J bolts on either side with 10 mm bolts through flanges on the heat shield over the muffler remove and seat pops strait back & off. Disconect the lighting wires and your done.
