Hygear triple rate front springs install and setup help

[SnoBird888]

I got myself a slightly used set of front springs to try out. Didnt get the revavle since only got like 200-300 miles left in this season. Anyways looking to see if anyone had a link to the instructions for installing them. I understand putting the springs all on with the connecting plastics but what about the 4 spacers that are included?
Also any insight as well to how you guys have your sleds setup with these springs? I got an 09 xtx. chassis is all stock besides some skidoo precision skis up front w/ 4" carbides inside and out. Problem is it turns good but in the loose trail snow it pushes hard and then all of a sudden grabs something and lifts the inside ski. almost flipped it real good doing this. On the faster slower turning trails they work great. was considering dumping the precisions for a single keel ski or pilots....

thanks everyone.

 

[sprintcat]

I have them on my sled , I like them . I would call hygear . if they r not open I will let u know how I set up mine .

 

[vsmpowered]

the spacers for ride height