I am changing out my drive bearing on my turbo apex. I have removed the left side bearing, loosened my track, stripped my chain case, removed the snap ring but I cannot get the drive shaft to move in inch in any direction. Is there something I'm missing or is there a specific direction in supposed to move the shaft?
I need help
- Thread starter pelkman85
- Start date
-
- Tags
- drive bearing drive shaft help
Ding
Lifetime Member
- Joined
- Dec 21, 2004
- Messages
- 547
- Reaction score
- 71
- Points
- 988
- Location
- Howell, MI
- Country
- USA
- Snowmobile
- Black & Blue
If chain case is off and speedo bearing is out the only thing left to hold it is the track. Just lift the track and bunch it up under the axle a bit to take the stress off the driveshaft. Or are you saying that you took the guts out of the chain case but the shaft is still in the bearing in the case?
If chaincase is off, you can pull either way. If not you have to pull towards clutch side.
If chaincase is off, you can pull either way. If not you have to pull towards clutch side.
Last edited:
Hey yeah I had a huge brain fart on this one didnt removed the case with bearing got it now though
