Idle stall

[Clamb]

just wondering if anybody has had a issue like me. Just rolled over 2000 miles and two times when I was turning right at low speed like one or two mile an hour my sled stalled out. Two other times when I coasted to a stop it stalled out it starts right back up and runs fine and when I brake two a stop it's fine and when I coast to a stop after the two stalls it didn't do it never had it happen before just annoying any ideas?

 

[cannondale27]

No codes? First year I got mine it did that accompanied by a P code just once. 15 flash eliminated that.

 

[yamamarc]

I had the exact same issue it was tps
Worth a check on gauge

 

[Clamb]

No no codes and it is a 15 I would imagine it has that flash-what did you have to do to fix the tps

 

[yamamarc]

No no codes and it is a 15 I would imagine it has that flash-what did you have to do to fix the tps

Do you know how to go into the troubleshooting menu on your gauge?

 

[yamamarc]

http://ty4stroke.com/threads/viper-idles-but-dies.147596/

 

[Clamb]

No but I have a service manual is it in there

 

[yamamarc]

No but I have a service manual is it in there

Read the link I just post (last 3 posts)

 

[yamamarc]

Turn your key to the on position (not start) and hold bottom left and right button for 5 sec to bring up troubleshoot menu scroll down to tps

 

[Clamb]

Yes just did thank you I will look into that tomorrow thanks good thinking

 

[Clamb]

I will post after I check it out

 

[yamamarc]

Mine was out when I cranked bars to the right causing my sled to stall
So check with bar cranked right left and center
Make sure to press throttle and release.
Mine showed 0% when bars were cranked right until I pushed and released thottle and it showed 4%

 

[yamamarc]

Hope it's the issue it's a simple fix

 

[Clamb]

Hope it's the issue it's a simple fix

Yea me two