stewartb
Expert
Two questions.
1) Has anyone here required a jump start?
2) Does anyone here carry jumper cables on/in their sled?
1) Has anyone here required a jump start?
2) Does anyone here carry jumper cables on/in their sled?
MUDDER
Veteran
I have not had to jump my sled yet but I do carry a set of cables in the storage pack in the front of the sled with the tool kit. It is a small set that I put in were my spare belt was. I did have to give a older Polaris FI a jump with them.
Simmering25355
Newbie
1, No
2, No
But it could be a good idea carrying cables if you have any storage left.
2, No
But it could be a good idea carrying cables if you have any storage left.
Sled Dog
Lifetime Member
1] NO
2] YES
2] YES
RIGIDONE
TY 4 Stroke Master
I have never had to use them but I do carry a set of jumper cables in my backpack. Made them myself nice and tiny about the size of 2 packs of cigarettes. If you are interested in making some I cant get you a pic of mine.
stewartb
Expert
I just bought some arctic grade 2-conductor #8 wire from a local supplier. I also picked up clamps and boots. It just got me thinking about what others are doing. Like wire size, type of clamps, and overall length. I never thought about it until now. I don't want to make them too heavy duty.
SB
SB
YAM182
Expert
1.No
2.Yes,stuffed in the front storage bag.Why do I carry them?
Because you never know when you may need them.
2.Yes,stuffed in the front storage bag.Why do I carry them?
Because you never know when you may need them.
stopdropanroll
TY 4 Stroke Master
stewartb said:I just bought some arctic grade 2-conductor #8 wire from a local supplier. I also picked up clamps and boots. It just got me thinking about what others are doing. Like wire size, type of clamps, and overall length. I never thought about it until now. I don't want to make them too heavy duty.
SB
I used standard 10AWG with jumper ends from the local HDWR store, I used a little torch and soldered the ends, made the cables about 6ft long then used some velcro to bundle them up, they fit perfectly in my "belt" holder, I used yellow and black FYI
Southern Renegade
Extreme
- Joined
- Jan 27, 2009
- Messages
- 104
- Location
- Rock Island Arsenal, Rock Island IL
- Country
- USA
- Snowmobile
- 2009 Polaris RMK Shift 144
no and yes I carry just the standard ones in the truck. Most of the time you can get back to camp in a short amount of time
arteeex
TY 4 Stroke Master
stewartb said:Two questions.
1) Has anyone here required a jump start?
2) Does anyone here carry jumper cables on/in their sled?
A1) I like a good jump start several times a week. My sled, on the other hand, like my wife has not yet shown the same interest.
A2) No I don't carry jumper cables on my sled. But without the option for pull, push or kick starting the beast this seems like a prudent idea.
I suppose you'd need wire and clamps that can move about 40A to work properly. And, I expect this shouldn't be hard to accomplish with today’s modern technologies.
Sled Dog
Lifetime Member
You see why you should not delete helpful posts. I posted a set of homemade cables that I had made but a moderator thought it was best to delete it. Sorry was going to post the link and I found it but its gone.
http://www.ty4stroke.com/viewtopic.php? ... per+cables
http://www.ty4stroke.com/viewtopic.php? ... per+cables
GetHighRacewear
Extreme
This thread got me thinking, It's probably not a bad idea to have a set in the tool pouch. How else are you gonna get your sled going if you are out on the trail and you battery dies. So I ordered a set of Yuasa, Motorcycle jumper cables, they even come with a carry pouch.
Attachments
stewartb
Expert
Let's focus on dead batteries. Nobody has responded as having one with their Nytro. The electronics seem fairly good at protecting the battery. I'm not sure what could drain a battery on these things and still leave the sled functional to start with jumpers. I'm on the fence whether to carry cables or not. Since there would have to be another machine (and rider) there to jump it I'm thinking a piece of 2-conductor wire with no terminals would be adequate for emergency use. Perhaps I'll just carry that. It would be much more compact. As for the cables I've built? One set in the trailer, one at the cabin. That's probably where I'd need them anyway.
SB
SB
upei93
TY 4 Stroke Guru
- Joined
- Apr 27, 2008
- Messages
- 942
- Location
- Dalhousie, NB
- Country
- Canada
- Snowmobile
- 2015 Viper X-TX LE MPI turbo
2009 Nytro XTX
One of my Buddies put a smaller (R1) battery in his Nytro to save weight and on cold days (-25ish celcius) he usually needs a boost...I have never needed a boost although I was close one morning (I think it was close to -30). IMHO it is nice when somebody in the group has cables...
Koeckman
Extreme
Mountain Performance has the best set going in my opinion. For $50 you can get a set that has a built in inverter that allows AC or DC charging with any snowmachine. You simply plug it into the headlight plug and go. It is a small set that will fit in any bag, pouch or pack. Here is the link to the page. Good luck
http://mountainperformance.com/yamaha_s ... _tools.htm
http://mountainperformance.com/yamaha_s ... _tools.htm
Similar threads
- Replies
- 0
- Views
- 620
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.