Limiter Strap Adjustment

[billymx815]

Stupid question - can someone give me the easiest way to pull the front limiter strap down 1 position?

 

[oldsledhead]

Place a 4x4 or something under the track right where the rails curve and have someone push down on rear of the sled.

 

[sorenson1610]

X 2 and it goes a lot faster without the skid full of ice

 

[Rayman5271]

Get someone to stand on the back of your sled... only takes 2 mins.

 

[NytroRtx]

Which hole is the stock setting? I have a used sled and not sure if the previous owner moved it already

 

[Rayman5271]

I believe 5 holes from the bottom.

 

[vector06]

What does this adjustment do?

 

[bwwelke]

The farther down you pull the straps the more ski pressure it puts on the front. Most people run it on the top hole, since we all know that the nytro doesn't need any more of that.

 

[vector06]

Ya...mine came full loose...kinda figured that....

 

[NytroRtx]

ok so i want it at least 6 from the bottom or 4 from the bottom?

 

[sorenson1610]

It says in the manual which one is stock, just for future reference. And you might want to run it on the second hole down from the top. So still loose but not so much ski lift. Made a big difference for me and can still pull the front end up at will if wanted.

 

[NytroRtx]

thanks

 

[GT03235]

Stupid question - can someone give me the easiest way to pull the front limiter strap down 1 position?

The easiest way i find for me is as follows.
I lift the back of the sled up to put a small car floor jack under the front of the skid then just lift up a few inchs and you will have all the wiggle room with the limiter strap you need

 

[billymx815]

Thanks for the tutorial guys