CJW
Extreme
warmers
I have already listed my 09 Nytro xtx. I would like to add my wifes 07 Phazer Mtn. My buddys 08 Nytor RTX and another buddys 06 Apex GT
I have already listed my 09 Nytro xtx. I would like to add my wifes 07 Phazer Mtn. My buddys 08 Nytor RTX and another buddys 06 Apex GT
T.P.
Veteran
06 Apex RTX - barely can feal any warmth!
07 Phazer FX
07 Phazer FX
hayastusa
Pro
Stew
2006 Attak
Original bars...nothin
'07 upgrade...nothin
I use gauntlets and mitts instead of gloves and put some of those air activated hand warmers inside when it gets below -10 celcius, but I fall off alot more because I can't grip the bars. (hey, it's better than frost bite).
2006 Attak
Original bars...nothin
'07 upgrade...nothin
I use gauntlets and mitts instead of gloves and put some of those air activated hand warmers inside when it gets below -10 celcius, but I fall off alot more because I can't grip the bars. (hey, it's better than frost bite).
08nytromtx
Veteran
Justin 08 Nytro MTX
Crewchief47
Lifetime Member
- Joined
- Jan 16, 2006
- Messages
- 2,830
- Location
- McGregor, ON Canada
- Country
- Canada
- Snowmobile
- 2008 Nytro MTX 45th
Tally to date:
2006
Apex=89
Vector=12
2007
Apex=48
Vector=6
Phazer=16
2008
Apex=15
Vector=6
Phazer=8
Nytro=40
2009
Apex=2
Vector=2
Phaxer=1
Nytro=37
03-05
Various=11
Total=293
2006
Apex=89
Vector=12
2007
Apex=48
Vector=6
Phazer=16
2008
Apex=15
Vector=6
Phazer=8
Nytro=40
2009
Apex=2
Vector=2
Phaxer=1
Nytro=37
03-05
Various=11
Total=293
4jwv
Veteran
Jeff, 2007 Attak GT. Handwarmers are not warm enough. 
apex*snowman
Newbie
- Joined
- Dec 28, 2008
- Messages
- 12
2006 apex mt, new bars and still no hand warmers, lets ride
turbogriesbach
Veteran
- Joined
- Sep 14, 2008
- Messages
- 27
- Age
- 61
- Location
- Hortonville,WI. U.S.A.
- Country
- USA
- Snowmobile
- 2006 Apex RTX
2010 Apex RTX
2005 RX-1 TURBO
- YAHOO
- kevingriesbach@yahoo.com
Hand coolers
2006 APEX RTX; origanal bars-kinda warm, updated bars-most the time can't feel anything, every now and then there warm, but only if temps above 10-F
2006 APEX RTX; origanal bars-kinda warm, updated bars-most the time can't feel anything, every now and then there warm, but only if temps above 10-F
doober
Extreme
I emailed Yamaha canada about this and this is their response, I even sent them a link to this post.
"It is very difficult to determine by e-mail if the output is sufficient.
You can imagine the many factors that are involved, and to be quite frank,
it is nearly impossible for us to build something of this nature that is
going to please every owner. The satisfaction of the heaters will depend on
the rider's own tolerance, type of gloves worn, etc.). There is a test that
your dealer can perform to determine if the output is sufficient but it
involves testing your snowmobile at different RPMs and I would not suggest
an owner perform this test. You need to confirm the DC voltage output at
1,500 rpm and at 4,500 rpm. To get the test done the snowmobile will need
to be running, raised, and the track spinning. This is not something that
should be done at home.
If you are ridding another identical Yamaha and think there is a huge
variance in output (and it's a stock machine) then you should speak with
your dealership. There will always be a variance of =/- 10%.
I do thank you for sharing your thoughts and will record your complaint. If
time and product monitoring indicate a change will be made at factory then
your dealership will be sent information and I suggest you sporadically
speak with them too."
"It is very difficult to determine by e-mail if the output is sufficient.
You can imagine the many factors that are involved, and to be quite frank,
it is nearly impossible for us to build something of this nature that is
going to please every owner. The satisfaction of the heaters will depend on
the rider's own tolerance, type of gloves worn, etc.). There is a test that
your dealer can perform to determine if the output is sufficient but it
involves testing your snowmobile at different RPMs and I would not suggest
an owner perform this test. You need to confirm the DC voltage output at
1,500 rpm and at 4,500 rpm. To get the test done the snowmobile will need
to be running, raised, and the track spinning. This is not something that
should be done at home.
If you are ridding another identical Yamaha and think there is a huge
variance in output (and it's a stock machine) then you should speak with
your dealership. There will always be a variance of =/- 10%.
I do thank you for sharing your thoughts and will record your complaint. If
time and product monitoring indicate a change will be made at factory then
your dealership will be sent information and I suggest you sporadically
speak with them too."
Attacker
Extreme
Not happy with the hand warmers until I put the 06 bars with the 07 upgrade wire harnes.
06 attak
Scott
06 attak
Scott
Reaper Mang
Newbie
Brent 07 Apex
Mtnviper
Vendor
Bill
09 Nytro xtx
09 Nytro xtx
Swiss Sledder
TY 4 Stroke God
Gentleman, please keep this thread to just posts of your sled(s) and name where you do not believe the hand-warmers are adequate. All other posts are being removed.
J-MAC (2) 06 apex rtx (1) 07 apex gt worst on the market......
(2) SRX GREAT
(1) 700 SX GREAT
(1) 700 VM GREAT
(1) 600 SX GREAT
YOU'D THINK IF NOTHING ELSE THEY COULD USE THE OLDER MODEL HAND WARMERS.
(2) SRX GREAT
(1) 700 SX GREAT
(1) 700 VM GREAT
(1) 600 SX GREAT
YOU'D THINK IF NOTHING ELSE THEY COULD USE THE OLDER MODEL HAND WARMERS.
Kevin Garceau
TY 4 Stroke Junkie
Kevin Garceau 07 apex no good
Carol Garceau 08 apex no good
Carol Garceau 08 apex no good